Fast, Flexible & Accessible, Your Test Facilitator, not simply a Test facility
Accredited
Scope Available
Programmes
Plus Certified
Expertise
Test Evidence
When discussing automotive flammability testing, FMVSS 302 and ISO 3795 often dominate the conversation. Both focus on the horizontal burning behaviour of interior materials and provide a consistent way to compare materials under controlled laboratory conditions.
UNECE Regulation No. 118 takes a broader approach.
Rather than concentrating solely on horizontal flame spread, UNECE R118 evaluates multiple aspects of fire behaviour, including vertical burning, melting behaviour, cable flame propagation and fuel or lubricant repellency. This wider scope reflects the increased complexity and passenger risk associated with large public-service vehicles, particularly buses and coaches.
For organisations supplying materials into European and UNECE markets, understanding UNECE R118 is essential.
UNECE Regulation No. 118 is a United Nations vehicle regulation establishing requirements for the burning behaviour and fuel or lubricant repellency of materials used in certain categories of motor vehicles.
The regulation applies primarily to M3 Class II and Class III vehicles, which include many buses and coaches used in passenger transport.
Unlike FMVSS 302 or ISO 3795, UNECE R118 is not simply a laboratory test method. It forms part of a vehicle approval framework that includes requirements for both components and complete vehicles.
Public-service vehicles present unique fire-safety challenges.
Compared with passenger cars, buses and coaches often:
For these reasons, regulators adopted a broader assessment philosophy. The objective is not just to evaluate burning rate, but to understand how materials behave in multiple realistic fire-related situations.
The regulation contains several annexes that address different fire-performance characteristics.
Each annex focuses on a specific question relating to material behaviour.
This structure allows approval requirements to be matched to the material’s intended location and function within the vehicle.
Annex 6 is the section most closely related to ISO 3795 and FMVSS 302.
A specimen is mounted horizontally and exposed to a controlled ignition source. Flame propagation is then assessed using distance and time measurements.
The objective is to determine how rapidly fire spreads across a material surface under defined conditions.
For many suppliers, Annex 6 is the point of entry into UNECE R118 because it employs equipment very similar to that used for other automotive interior flammability methods.
Horizontal burn rate alone does not reveal everything about a material’s behaviour during a fire.
Some materials melt and drip when heated. In certain environments, these droplets may ignite other materials below them.
To address this hazard, Annex 7 evaluates melting behaviour.
The test examines whether molten droplets are capable of igniting cotton wool positioned beneath the specimen.
This provides an additional safeguard against secondary ignition hazards that may not be apparent in a standard horizontal burn test.
Annex 8 evaluates materials installed in vertical orientations.
Vertical burning behaviour can differ significantly from horizontal burning behaviour because buoyancy effects promote upward flame spread.
The test assesses:
Marker threads are used to monitor flame progression, and the resulting performance is evaluated against defined acceptance requirements.
Materials that perform adequately in a horizontal orientation cannot automatically be assumed to satisfy vertical burning requirements.
Insulation materials located in engine compartments and heating compartments may be exposed to fuel or lubricant contamination.
Annex 9 evaluates the extent to which materials absorb these liquids.
The purpose is to ensure that contamination does not significantly increase fire hazards.
The regulation uses mass-gain measurements to determine fuel or lubricant uptake.
This requirement demonstrates how UNECE R118 extends beyond traditional flammability assessment into broader fire-risk management.
Modern buses and coaches contain extensive electrical systems.
Cables can become pathways for flame propagation if insulation systems perform poorly during fire exposure.
Annex 10 introduces dedicated assessments for cable flame propagation.
The objective is to ensure that cable insulation does not support unacceptable fire spread.
The regulation also addresses cable sleeves and conduits through associated requirements.
One of the most important aspects of UNECE R118 is that it supports both:
This means compliance is not limited to individual materials.
Manufacturers must demonstrate that components, installations and complete vehicle systems satisfy applicable requirements.
Vehicle approval therefore becomes a broader systems exercise rather than simply a collection of isolated material tests.
A key concept within UNECE R118 is installation direction.
The regulation recognises that materials may behave differently depending on how they are installed within a vehicle.
A material approved for one orientation cannot automatically be assumed suitable for another.
This principle is particularly important when evaluating:
Successful compliance therefore requires an understanding of both the material and its intended application.
Resonate testing provides high quality fire, mechanical, and environmental test solutions and certification services across a wide range of industrial sectors. From Primes to SME’s, Resonate Testing provides a bespoke and tailored service to our clients.
Resonate testing provides high quality fire, mechanical, and environmental test solutions and certification services across a wide range of industrial sectors. From Primes to SME’s, Resonate Testing provides a bespoke and tailored service to our clients.
Use the contact route to share the requirement, test profile, drawings or specification for review.
Whether you’re looking to contact us for the first time or have another testing requirement, we’d love to hear from you.