UNECE Regulation No. 118: A Wider View of Fire Behaviour in Buses and Coaches

 Fast, Flexible & Accessible, Your Test Facilitator, not simply a Test facility

UKAS

Scope Available

Cyber Essentials

Plus Certified

Battery Testing

Expertise

Independent

Test Evidence

Introduction

When discussing automotive flammability testing, FMVSS 302 and ISO 3795 often dominate the conversation. Both focus on the horizontal burning behaviour of interior materials and provide a consistent way to compare materials under controlled laboratory conditions.

UNECE Regulation No. 118 takes a broader approach.

Rather than concentrating solely on horizontal flame spread, UNECE R118 evaluates multiple aspects of fire behaviour, including vertical burning, melting behaviour, cable flame propagation and fuel or lubricant repellency. This wider scope reflects the increased complexity and passenger risk associated with large public-service vehicles, particularly buses and coaches.

For organisations supplying materials into European and UNECE markets, understanding UNECE R118 is essential.

What Is UNECE Regulation No. 118?

UNECE Regulation No. 118 is a United Nations vehicle regulation establishing requirements for the burning behaviour and fuel or lubricant repellency of materials used in certain categories of motor vehicles.

The regulation applies primarily to M3 Class II and Class III vehicles, which include many buses and coaches used in passenger transport.

Unlike FMVSS 302 or ISO 3795, UNECE R118 is not simply a laboratory test method. It forms part of a vehicle approval framework that includes requirements for both components and complete vehicles.

Why UNECE R118 Was Developed

Public-service vehicles present unique fire-safety challenges.

Compared with passenger cars, buses and coaches often:

  • Carry larger numbers of occupants.
  • Operate for extended periods.
  • Contain extensive interior trim systems.
  • Incorporate significant quantities of cabling.
  • Include engine and heating compartment insulation.
  • Have evacuation scenarios that may be more complex.

For these reasons, regulators adopted a broader assessment philosophy. The objective is not just to evaluate burning rate, but to understand how materials behave in multiple realistic fire-related situations.

Useful external references:
Reference standards:

The Structure of UNECE R118

The regulation contains several annexes that address different fire-performance characteristics.

Each annex focuses on a specific question relating to material behaviour.

This structure allows approval requirements to be matched to the material’s intended location and function within the vehicle.

Annex 6 – Horizontal Burning Rate

Annex 6 is the section most closely related to ISO 3795 and FMVSS 302.

A specimen is mounted horizontally and exposed to a controlled ignition source. Flame propagation is then assessed using distance and time measurements.

The objective is to determine how rapidly fire spreads across a material surface under defined conditions.

For many suppliers, Annex 6 is the point of entry into UNECE R118 because it employs equipment very similar to that used for other automotive interior flammability methods.

Annex 7 – Melting Behaviour

Horizontal burn rate alone does not reveal everything about a material’s behaviour during a fire.

Some materials melt and drip when heated. In certain environments, these droplets may ignite other materials below them.

To address this hazard, Annex 7 evaluates melting behaviour.

The test examines whether molten droplets are capable of igniting cotton wool positioned beneath the specimen.

This provides an additional safeguard against secondary ignition hazards that may not be apparent in a standard horizontal burn test.

Annex 8 – Vertical Burning Behaviour

Annex 8 evaluates materials installed in vertical orientations.

Vertical burning behaviour can differ significantly from horizontal burning behaviour because buoyancy effects promote upward flame spread.

The test assesses:

  • Flame propagation.
  • Burning rate.
  • Self-extinguishment characteristics.

Marker threads are used to monitor flame progression, and the resulting performance is evaluated against defined acceptance requirements.

Materials that perform adequately in a horizontal orientation cannot automatically be assumed to satisfy vertical burning requirements.

Annex 9 – Fuel and Lubricant Repellency

Insulation materials located in engine compartments and heating compartments may be exposed to fuel or lubricant contamination.

Annex 9 evaluates the extent to which materials absorb these liquids.

The purpose is to ensure that contamination does not significantly increase fire hazards.

The regulation uses mass-gain measurements to determine fuel or lubricant uptake.

This requirement demonstrates how UNECE R118 extends beyond traditional flammability assessment into broader fire-risk management.

Annex 10 – Electrical Cables

Modern buses and coaches contain extensive electrical systems.

Cables can become pathways for flame propagation if insulation systems perform poorly during fire exposure.

Annex 10 introduces dedicated assessments for cable flame propagation.

The objective is to ensure that cable insulation does not support unacceptable fire spread.

The regulation also addresses cable sleeves and conduits through associated requirements.

 

Component Approval and Vehicle Approval

One of the most important aspects of UNECE R118 is that it supports both:

  • Component approval.
  • Vehicle-type approval.

This means compliance is not limited to individual materials.

Manufacturers must demonstrate that components, installations and complete vehicle systems satisfy applicable requirements.

Vehicle approval therefore becomes a broader systems exercise rather than simply a collection of isolated material tests.

Installation Direction Matters

A key concept within UNECE R118 is installation direction.

The regulation recognises that materials may behave differently depending on how they are installed within a vehicle.

A material approved for one orientation cannot automatically be assumed suitable for another.

This principle is particularly important when evaluating:

  • Vertical interior trim.
  • Ceiling materials.
  • Insulation systems.
  • Cable routing products.

Successful compliance therefore requires an understanding of both the material and its intended application.

Replicating real-world conditions in one location.

Resonate testing provides high quality fire, mechanical, and environmental test solutions and certification services across a wide range of industrial sectors. From Primes to SME’s, Resonate Testing provides a bespoke and tailored service to our clients.

TVAC Testing in the UK & Ireland

Resonate testing provides high quality fire, mechanical, and environmental test solutions and certification services across a wide range of industrial sectors. From Primes to SME’s, Resonate Testing provides a bespoke and tailored service to our clients.

Send your IEC 62281 or UN 38.3 requirement for engineer review

Use the contact route to share the requirement, test profile, drawings or specification for review.

Contact Form

Whether you’re looking to contact us for the first time or have another testing requirement,  we’d love to hear from you.